Quick stats:
- Total submissions: 33
- Total countries: 11
- Total provinces: 4
- Total states: 14
You can click on the photo to view a larger version.
Quick stats:
You can click on the photo to view a larger version.
My tip for accuracy is to mark my clear quilting rulers with painters tape.
A quarter-inch foot with the metal guide on the side is a must for accurate sewing for me. I could not live with out it (at least I wouldn’t want to!!!)
When I think embroidery, I always think of hand-embroidery but some of this machine work is pretty cool.
Always double check measurements before cutting.
I always use the quilting rulers. My 15″ x 15″ is my “go-to” tool for accuracy. Even though I have smaller ones, I always end up using the larger one to make sure everything is really accurate.
Using the 1/4inch foot is a great help!
Make sure the fabric doesn’t stretch when you get it to the ironing board. Press instead of iron.
Always measure twice, cut once.
Ironing and tripping after every step of piecing.
Square up your block sections as well as the completed block. It takes extra time, but your blocks will go together better & your seams will match up. Thanks.
Keep a small pair of scissors at your ironing board to trim threads. The tendency to “break” those threads distorts your blocks.
There’s a tool called ‘the Angler’ which is great for accurate piecing and seams 🙂 It can be attached to your sewing machine very easily.
Lightly spray starch your fabric before cutting it to size. It dramatically improves accuracy and it minimizes (if no eliminates) fraying. I also like to starch as I piece. You can make your own spray starch for pennies a bottle!
I have a piece of Painters Tape on the bed of my sewing machine to guide the edge of my fabric for the seam allowance. If I need to change the needle position or stitch length, I can write on the tape if I will need to go back to the original settings.
Measure twice – cut once is the best tip from me. Too often I have caught myself just in time of making a wrong cut. This is true especially when paper piecing – I almost cut off the wrong part instead of making a 1/4″ seam in my trimming
Measure twice and cut once.
Thread thickness makes a difference in accurate piecing.
measure measure measure!
A quarter inch pressure foot it my best guide for accurate seams.
Nice sharp blade for your rotary cutter!!
Block when completed, it will help the overall look.
My tip would be to remember that quilting isn’t a race. Slow down, pedal to the metal doesn’t apply when piecing.
When piecing strips that require full (width of fabric) together for sub cutting, I always cut my strip in half before sewing. Less waving when I iron. You can lay one strip on top of the other and snug the opposing seams and cut once to get two pieces. Great for making four patches or nine patches.
Very beautiul Quilts. Love all the work everyone has done here.
JeanneZ
I like to go by intuition
Measure measure and then measure again. And what it closely….and I am still no good at it..lol…
My quilts seem to go together best-when I have a fresh blade in my rotary cutter and a nice flat groove-free cutting mat.
This one’s not a new one, but an old one and a good one: Measure twice, cut once.
Deborah
pinkscissorsdesign@ gmail .com
For accuracy I cut with my Accuquilt Go! whenever possible!
I only cut out a few blocks at a time. It is a little slower but, if I’ve made any mistakes, I haven’t wasted a whole quilts worth of fabric, just a few blocks.
Sew straight seams.
I do have a question to being more accurate. I do a lot of FMQ and I realized I have a hard time coming back on the same line when I’m backing out of a design. I would really appreciate any suggestions on how to make it look like I can’t follow a line ( which apparently I can’t). Thanks.
Frequently change the rotary blade. Invest in a variety of great rulers so you have what you need.
press, press, press
If I start with a ruler, I continue with the same ruler through the whole project. Even if two rulers come from the same company, I have seen a tiny bit of difference between the two. I also use a 2 ply 50 weight thread for piecing. It’s just as strong and doesn’t take up the same amount of room as a 3 ply 50 weight. (And yes, I can tell the difference by feeling the thread)
Pressing at every step, before cutting fabric, every seam allowances and final assembling is my best tip.
My tip is to take things nice and slowly 🙂
do the best you can and be satisfied with that :)))
For my accuracy I make sure my 1/4 inch seam is the same on all the blocks or it will not fit, also make sure they are cut properly by using the proper cuttiing ruler and a good blade.
I was going to enter in this weeks contest because I have our Family quilt and pillows that could have fit this category and I forgot !! All of these are great ones ,I hope the best one wins
never cut fabric when you have migraine as it will drive you crazy the next day trying to figure out what you did.
Never cut fabric if you are tiered or not feeling good 🙁
I use a die cutter to improve my accuracy in cutting and the stitching follows right along.
Do not use steam when pressing your pieced blocks. The steam may distort or stretch the blocks, especially those with a lot of bias.
When machine piecing, I always use a scant quarter inch
seam. I have found this to be the best way for me to achieve accuracy .
My accuracy tip is to make sure you square up blocks before assembling a big block. It will go together so much easier.
I mark my ruler with some tape if I’m making the same cut many times.
My tip is to check your quarter inch foot is accurate.
I set my needle one step off center towards the edge as after seams are pressed they take up that tiny fraction
Measure twice, cut once! Learned that in my first quilting class & it’s in my head every time I line up my ruler!
Awesome quilts this week – hard to choose but for sure “In My Garden” has to be the winner. I’d like to meet that “young” lady!
I always use the same scant 1/4″ seam ruler (with a hole to place my needle in as a guide) and then use my seam guide attachment or tape on the sewing machine to guide my fabric by. Doing this means I can go from one sewing machine to another and work on the same quilt top and always have a perfect seam allowance and everything fits together beautifully.
I usually go by the rule measure twice and cut once because it is so easy to think you are being accurate and then find out you are off just by a little bit. Checking my measurement again before I have actually cut has saved me a few times from cutting my fabric slightly too small.
Keep your seam ripper and extra fabric handy.
Never use your cutting mat on a semi hard surface such as a carpet. It will distort your cuts.
Keep your rulers and mats clean and your rotary blade sharp to avoid wiggles, and work with good light. Thanks for this weekly fun!
always measure twice and take your time, dont rush 🙂
I think squaring up the blocks before sewing the quilt top together is very imporant.
My tip is before starting a pattern, go to the designer’s web site or the publisher’s site to see if there are any corrections posted. This could save you from cutting something incorrectly and save you time and headaches while working in the pattern.
When possible cut pieces slightly oversize and trim units to size before completing a block.
Start each project with a new needle and quick tension check. I hate getting halfway through a chain piecing session only to find bumpy seams underneath!
Thanks for the great giveaway opportunity!
Spray starch the fabric before cutting for a more accurate cut.
When cutting, I never use the lines on the mat, only on the ruler. And, use the same ruler for the whole project.
Square up your blocks, your rows, and your quilt every chance you can. It saves you headaches later.
The quarter inch seam is so important. Check to make sure you are getting that.
Be sure to check your quarter inch seam before each new project. Once it is accurate, place a removable Command strip on your machine bed to use as a guide.
A walking foot helped me tremendously.
I am a firm believer in pinning for accuracy.
Never cut when you are tired, have a good light and extra fabric just in case.
Leave a Reply